Twitter
Twitter
Facebook
Kaspersky Partner
Twitter
Facebook
Kaspersky Partner

KB - Nouveaux articles dans la Base de connaissances

01.12.22 – How to configure automatic startup for the TONK TN1200 thin client


jeudi 1 décembre 2022

How to configure automatic startup for the TONK TN1200 thin client

We recommend that this setting is done by the administrators responsible for this solution in your company.

To configure automatic startup for the TONK TN1200 thin client, follow the steps:

  1. Enter BIOS. To do so, reboot the thin client and press F2 on the keyboard several times after the beep.
  2. Go to ChipsetSouth Cluster ConfigurationMiscellaneous ConfigurationState After G3 and select S0 State: System will boot directly as soon as power applied.
  3. Press F10 to save the changes and exit BIOS.

The automatic startup for the TONK TN1200 thin client will be configured.


Knowledge Base :

Views: 17

01.12.22 – How to configure automatic startup for the TONK TN1200 thin client

How to configure automatic startup for the TONK TN1200 thin client

We recommend that this setting is done by the administrators responsible for this solution in your company.

To configure automatic startup for the TONK TN1200 thin client, follow the steps:

  1. Enter BIOS. To do so, reboot the thin client and press F2 on the keyboard several times after the beep.
  2. Go to ChipsetSouth Cluster ConfigurationMiscellaneous ConfigurationState After G3 and select S0 State: System will boot directly as soon as power applied.
  3. Press F10 to save the changes and exit BIOS.

The automatic startup for the TONK TN1200 thin client will be configured.


Knowledge Base :

Views: 17

01.12.22 – How to configure automatic startup for the TONK TN1200 thin client

How to configure automatic startup for the TONK TN1200 thin client

We recommend that this setting is done by the administrators responsible for this solution in your company.

To configure automatic startup for the TONK TN1200 thin client, follow the steps:

  1. Enter BIOS. To do so, reboot the thin client and press F2 on the keyboard several times after the beep.
  2. Go to ChipsetSouth Cluster ConfigurationMiscellaneous ConfigurationState After G3 and select S0 State: System will boot directly as soon as power applied.
  3. Press F10 to save the changes and exit BIOS.

The automatic startup for the TONK TN1200 thin client will be configured.


Knowledge Base :

Views: 17